How to Make a Two-Part Mold
How to Make a Simple Two-Part Mold Using Urethane RTV Rubber
Creating a two-part mold is essential for capturing the details of complex shapes that cannot be removed from a one-part mold. This guide will walk you through the step-by-step process of making a two-part mold using urethane RTV rubber. The same process can also be applied to silicone RTV rubber.
Step 1: Preparing the Part and Mold Container
-
Determine the Mold Line – Analyze the shape of your part and decide where the two halves of the mold should come together.
-
Create a Mold Container – Construct a mold box using acrylic strips, leaving at least a 1/4-inch space around the part. Secure the sides together with a glue gun, ensuring a watertight seal.
-
Attach the Base – Lightly glue the base to the box. The bond should be strong enough to prevent leaks but weak enough for easy removal later.
Step 2: Embedding the Part in Clay
-
Use Non-Hardening Clay – Embed the part halfway into a non-hardening clay base. Smooth the surface to prevent any liquid rubber from seeping underneath.
-
Create Registration Keys – Press a pencil end or similar tool into the clay near the corners to form small indentations. These will help align the two halves of the mold.
Step 3: Preparing and Pouring the Urethane
-
Measure the Required Urethane – Pour rice into the mold to estimate the volume needed, then transfer the rice into a measuring cup.
-
Apply Mold Release – Use a light misting of Pol-Ease 2300 Mold Release to ensure easy separation later.
-
Mix and Pour the Urethane – Prepare the urethane in a 1:1 mix ratio. Pour it slowly into the mold's corner, allowing it to flow and push air out naturally. Avoid pouring directly onto the part to prevent air bubbles.
-
Let it Cure – Allow 24 hours for the urethane to fully cure.
Step 4: Removing the Clay and Preparing for the Second Half
-
Detach the Base – Carefully separate the base from the mold box without disturbing the sides.
-
Remove the Clay – Clear out all the clay while keeping the part in place. The indentations made earlier should now appear as protrusions (keys) in the cured urethane.
Step 5: Creating the Second Half of the Mold
-
Apply Mold Release – Spray the mold release on the part and the exposed urethane mold.
-
Mix and Pour the Urethane – Prepare the second batch of urethane and pour it as done earlier.
-
Allow to Cure – Let it set for another 24 hours.
Step 6: Demolding and Assembling the Mold
-
Remove the Mold from the Box – The urethane mold should slide out easily. If not, gently pry the box open.
-
Separate the Mold Halves – Start at a corner and carefully pry the two mold halves apart.
-
Extract the Part – Once removed, your mold is now ready for use.
-
Secure the Mold for Casting – To keep the mold halves together during casting, use rubber bands. To avoid distortion, place plastic or wooden boards on the front and back of the mold before securing with rubber bands.
Now your two-part mold is ready to create multiple castings using the material of your choice!
What does TAP do?
<p><strong>Discover What TAP Plastics Can Do for You</strong></p> <p>At TAP Plastics, one of the most common questions we receive is: <em>Wha
TAP Plastics Store Tour
<p><strong>Explore TAP Plastics: A Retail Store Tour</strong></p> <p>Welcome to TAP Plastics! If you’ve ever wondered what we sell, you’re in f
TAP DIY: Custom AC Vent Window Adapters
<h1>Custom AC Vent Window Adapters – Get the Perfect Fit at TAP Plastics</h1> <p>Summer is coming, and if you don’t have central air conditioning, a portab
How To Make Fiberglass Part - Part 2
<p><strong>How to Make a Fiberglass Part from a Mold</strong></p> <p>Creating a fiberglass part from a mold requires careful preparation, applicati
How To Make Fiberglass Part - Part 1
<h1>How to Make a Fiberglass Mold: Step-by-Step Guide (Part 1)</h1> <p>Fiberglass molding is a great technique for duplicating parts, such as a boat hull. This
How To Repair Wood with Fiberglass
<p><strong>Quick and Invisible Wood Repair: A Step-by-Step Guide</strong></p> <p>Wood repairs, whether indoors or outdoors, can be quick, seamless,
How to Cut Plastic Sheets
<p><strong>How to Cut Plastic Sheets: A Guide for DIYers and Professionals</strong></p> <p>The best way to cut plastic sheets, like acrylic plexigl
How to Make a Latex Mold
<p><strong>How to Make a Simple Latex Mold with TAP Premium Liquid Latex Rubber (NOTICE: TAP Premium Liquid Latex Rubber has been DISCONTINUED)</strong></p>
How to Make a Urethane Mold
<p><strong>How to Make a Simple Urethane Mold</strong></p> <p>Urethane molding is an effective way to create simple block molds for casting resins,
How to Make a Simple Silicone Mold Part 1
<p><strong>How to Work with TAP Silicone RTV System: A Step-by-Step Guide - Part 1</strong> (<a href="https://www.tapplastics.com/product_info/videos/how_
How to Make a Simple Silicone Mold Part 2
<p><strong>How to Mix and Pour <a href="https://www.tapplastics.com/product/mold_making_materials/mold_making_supplies/tap_silicone_rtv_mold_making_system/61&qu
How to Build a Box with Plastic
<p><strong>How to Build a Basic Acrylic Box: A Step-by-Step Guide</strong></p> <p>Plastic is a fantastic material for creating a variety of project
How to Make a Two-Part Mold
<p><strong>How to Make a Simple Two-Part Mold Using Urethane RTV Rubber</strong></p> <p>Creating a two-part mold is essential for capturing the det
How to Build a Mold Box
<p><strong>How to Make Mold Boxes for Urethane and Silicone RTV Molds</strong></p> <p><a href="https://www.tapplastics.com/product/mold_mak
How to Make Jewels, Gems, Crystals, and Pendants
<p><strong>How to Make Your Own Jewelry, Gems, and Crystals with Casting Resin</strong></p> <p>Creating your own custom jewels, gems, crystals, and
How to make a Resin Table Top Part 1
<p><strong>How to Create a Custom Resin Tabletop with Embedded Designs</strong></p> <p>Nothing matches the beauty of a crystal-clear resin tabletop
How to Make a Resin Table Top Part 2
<a href="https://www.tapplastics.com/product_info/videos/how_to_make_a_resin_table_top_part_1">Click here</a> to see Part 1. <p> </p>
How to use Envirotex Lite and Ultra-Seal
<p><strong>Guide to Using Ultra-Glo and Ultra-Seal</strong></p> <h3>Introduction</h3> <p>This guide provides step-by-step instructio
How To Glue Acrylic
<p><strong>A Beginner's Guide to Gluing Acrylic: Tips and Techniques</strong></p> <p>Gluing acrylic is a unique process that differs significantly
How to Bend Plastic
<p><strong>A Complete Guide to Bending Plastic with a Strip Heater</strong></p> <p>Bending plastic is an essential technique for many DIY and profe
How to build a Plastic Heat Bender
<p><strong>How to Build and Use a DIY Plastic Line Bender</strong></p> <p>Bending plastic sheets at home is made easy with a DIY line bender. This
How to Polish and Repair Scratched Plastic
<p><strong>How to Polish and Maintain Plastic for a Sparkling Finish</strong></p> <p>Plastic is a beautiful and decorative material, known for its
How to Polish and Shape Plastic Edges
<p><strong>Acrylic Edge Finishing Techniques</strong></p> <p>Acrylic plastic can be incredibly beautiful, especially when its edges are properly pr
How to Repair Scratched CDs, DVDs, iPods and more
<p><strong>How to Restore Scratched Plastics with the Novus Polish System</strong></p> <p>Scratched plastic surfaces can be frustrating, but you do
How to Protect Your LCD or LED TV
<p><strong>Protect Your LCD and DLP TV Screens with a Custom Screen Protector</strong></p> <p>LCD TVs, DLP TVs, and LCD computer monitors have soft
Fiberglass Repair Guide
<p><strong>Fiberglass Repair Guide</strong></p> <p>This guide provides a step-by-step demonstration of a simple fiberglass repair. The methods outl
How to Repair Gelcoat Part 1
<p><strong>How to Perform a Simple Non-Structural Gel Coat Repair</strong></p> <p>Gel coat is a protective outer layer applied to fiberglass surfac
How to repair Gelcoat Part 2
<p><strong>How to Apply and Finish Gel Coat for Fiberglass Repair (</strong><a href="https://www.tapplastics.com/product_info/videos/how_to_repair_gelcoat
How to Waterproof with Coat-It
<p><strong>How to Create a Tough, Waterproof Coating with Coat-It</strong></p> <p>Creating a durable, waterproof coating requires the right materia
How to Apply Vinyl Graphics
<p><strong>How to Install Self-Adhesive Vinyl Graphics for a Professional Finish</strong></p> <p>Self-adhesive vinyl graphics are an affordable and
How to Select Window Film
<p><strong>A Comprehensive Guide to Choosing the Right Window Film</strong></p> <p>Window film can offer tremendous benefits to your home or busine
How To Install Window Film
<p><strong>How to Install Window Film Like a Pro</strong></p> <p>Installing window film in your home or business is an excellent way to achieve pro
Cosplay DIY Supplies
<p><strong>The Ultimate Cosplay Materials Guide from TAP Plastics</strong></p> <p>Bringing your cosplay dreams to life requires the right materials
TAP InstaShape Video Demo
<h1><strong>How to Use TAP Insta Shape: A Versatile Moldable Plastic for DIY & Cosplay</strong></h1> <p>TAP Insta Shape is a moldable therm
Plastic Containers at TAP Plastics
<h1>Find the Perfect Container for Every Need at TAP Plastics</h1> <p>TAP Plastics offers a wide variety of <strong>containers</strong> designed fo
Display Items at TAP
<h1><strong>Custom & Ready-Made Display Cases, Stands, and Boxes – TAP Plastics</strong></h1> <p>Looking for the perfect way to showcase
Fiberglass Roller
<p><strong>A Guide to Fiberglassing with Rollers</strong></p> <p>Fiberglassing with rollers is an efficient way to create strong, lightweight, and
Guide to Rod Stock and Shapes at TAP Plastics
<p><strong>Guide to Rod Stock and Shapes at TAP Plastics</strong></p> <p><a href="https://www.tapplastics.com/product/plastics/plastic_rods
Tubing Options at TAP Plastics
<p><strong>A Guide to Tubing Options at TAP Plastics</strong></p> <p>TAP Plastics carries a wide variety of tubing options for different applicatio
Plastic Materials on Rolls at TAP Plastics
<h1>A Guide to Plastic Materials on Rolls at TAP Plastics</h1> <p>TAP Plastics offers a wide variety of plastic materials on rolls, available by the foot, yard
Trade Show Essentials at TAP Plastics
<h1>Enhance Your Trade Show Display with TAP Plastics</h1> <p>A successful trade show display captures attention, showcases your brand, and leaves a lasting im
How to Work with Worbla
<h1><strong>Worbla: The Ultimate Thermoplastic for Cosplay, Crafting, and Model Making</strong></h1> <p>Worbla is a <strong>non-toxic thermop
Picture Frames and Display Holders
<h1><strong>Picture Frames & Display Holders at TAP Plastics</strong></h1> <p>TAP Plastics offers a wide variety of <strong>picture f
Adhesive Glues and Tapes
<p><strong>Your Guide to Choosing the Right Adhesive and Tape at TAP Plastics</strong></p> <p>When it comes to bonding different materials, choosin
Literature Holders at TAP Plastics
<p><strong>A Guide to Literature Holders from TAP Plastics</strong></p> <p>When it comes to organizing and displaying literature in a professional
Three Dimensional Signage with the Quick Snap System
<p><strong>How to Create Professional 3D Signs with the Quick Snap Letter System</strong></p> <p>Three-dimensional signs add depth and visual impac
The Basics of Fiberglass Fabric
<p><strong>A Comprehensive Guide to Fiberglass Fabric: Choosing the Right Reinforcement</strong></p> <h3>Introduction</h3> <p>Fiberg
Picture Framing Options at TAP Plastics
<p><strong>A Guide to Picture Framing Options at TAP Plastics</strong></p> <p>Framing pictures, posters, or menus doesn’t have to be limited to t
Introduction to Mold Making
<p><strong>A Guide to Choosing the Right Flexible Mold Material from TAP Plastics</strong></p> <p>When creating molds for casting, selecting the ri
Introduction to TAP Platinum Silicone
<p><strong>The Ultimate Guide to Mold Making with TAP Platinum Silicone</strong></p> <p>Mold making has never been easier with <a href="htt
