Fiberglass Repair Guide

Fiberglass Repair Guide

This guide provides a step-by-step demonstration of a simple fiberglass repair. The methods outlined here apply to various fiberglass products, including jet skis, shower stalls, car and truck bodies, boats, canoes, and kayaks. While this is just one repair method, TAP Plastics offers instructional books with more extensive guidance.

Understanding Fiberglass Damage

Although fiberglass is a tough material, it can still sustain damage. Minor damage can often be repaired by a DIY enthusiast, saving significant repair costs. This guide assumes that the damaged area is accessible from the backside and that the repair is being performed on a solid, non-cored fiberglass piece. If your repair area contains core material, the procedure will differ.

Step 1: Remove the Damaged Area

Using a cutting tool, remove only the damaged portion of the fiberglass. It is important to eliminate all compromised material while preserving as much of the original structure as possible.

Step 2: Prepare the Surface

To ensure a strong bond, grind a tapered area outward from the hole. A good rule of thumb is to create a taper that extends 12 times the thickness of the fiberglass. For example, if the fiberglass is 1/4 inch thick, grind a 3-inch taper around the damaged area. Be sure to wear eye and breathing protection while grinding.

Once grinding is complete, wipe the area thoroughly with a clean rag and acetone.

Step 3: Create a Temporary Mold for the Gel Coat

Since the fiberglass surface often has a gel coat, it must be replaced to maintain a seamless appearance. Create a mold using a 5-mil Mylar sheet backed by Styrofoam to keep it flat. Polyester resin does not adhere to Mylar, but you may also use polyethylene or polypropylene, ensuring they are well-waxed for a proper release. Tape the Mylar tightly to the gel-coated surface, securing it with Styrofoam backing.

Step 4: Apply the Gel Coat

1. Mix white gel coat with 20 drops of catalyst per ounce of resin.

2. Apply the gel coat to the temporary mold until it reaches a thickness of 18 to 20 mils (approximately 1/32 inch). You can use a mill gauge or a toothpick to estimate thickness.

3. Allow the gel coat to cure for about one hour, depending on ambient temperature.

Step 5: Prepare Fiberglass Fabric Layers

While the gel coat is curing, cut out fiberglass fabric layers:

• First two layers: 1.5 oz mat, with the first piece slightly larger than the hole and the second about an inch larger.

• Third layer: 9 oz cloth, one inch larger than the previous layer.

• Continue alternating layers of mat and cloth until the new material equals the thickness of the original fiberglass.

• Final layer: A piece of woven roving, slightly larger than the repair area, to match the surrounding surface.

Step 6: Apply Fiberglass and Resin

1. Use TAP High-Strength ISO Resin for its superior adhesion, low viscosity, and no need for sanding between coats.

2. Mix the resin and MEKP catalyst according to the container’s instructions.

3. Brush resin onto the surface and apply the first layer of mat, ensuring it is closest to the gel coat. Avoid using cloth or roving as the first layer, as their texture may show through the gel coat.

4. Continue applying layers in the predetermined order, fully wetting each layer with resin.

5. Allow the repair to cure completely.

Step 7: Finish the Repair

1. Once fully cured, remove the Mylar sheet.

2. Follow instructions from the TAP Plastics gel coat repair guide to sand and buff the surface until the repair is seamlessly blended.

3. Wait at least seven days before exposing the repair to water, allowing the resin to fully cure.

By following these steps, you can achieve a professional-quality fiberglass repair and enjoy the satisfaction of a successful DIY project.

What does TAP do?

<p><strong>Discover What TAP Plastics Can Do for You</strong></p> <p>At TAP Plastics, one of the most common questions we receive is: <em>Wha

TAP Plastics Store Tour

<p><strong>Explore TAP Plastics: A Retail Store Tour</strong></p> <p>Welcome to TAP Plastics! If you’ve ever wondered what we sell, you’re in f

Customer Projects for 2018

A look at our customer projects in 2018.

TAP Customer's Project Montage

Video montage of our customer's projects.

TAP DIY: Custom AC Vent Window Adapters

<h1>Custom AC Vent Window Adapters – Get the Perfect Fit at TAP Plastics</h1> <p>Summer is coming, and if you don’t have central air conditioning, a portab

How To Make Fiberglass Part - Part 2

<p><strong>How to Make a Fiberglass Part from a Mold</strong></p> <p>Creating a fiberglass part from a mold requires careful preparation, applicati

How To Make Fiberglass Part - Part 1

<h1>How to Make a Fiberglass Mold: Step-by-Step Guide (Part 1)</h1> <p>Fiberglass molding is a great technique for duplicating parts, such as a boat hull. This

How To Repair Wood with Fiberglass

<p><strong>Quick and Invisible Wood Repair: A Step-by-Step Guide</strong></p> <p>Wood repairs, whether indoors or outdoors, can be quick, seamless,

How to Cut Plastic Sheets

<p><strong>How to Cut Plastic Sheets: A Guide for DIYers and Professionals</strong></p> <p>The best way to cut plastic sheets, like acrylic plexigl

How to Make a Latex Mold

<p><strong>How to Make a Simple Latex Mold with TAP Premium Liquid Latex Rubber (NOTICE: TAP Premium Liquid Latex Rubber has been DISCONTINUED)</strong></p>

How to Make a Urethane Mold

<p><strong>How to Make a Simple Urethane Mold</strong></p> <p>Urethane molding is an effective way to create simple block molds for casting resins,

How to Make a Simple Silicone Mold Part 1

<p><strong>How to Work with TAP Silicone RTV System: A Step-by-Step Guide - Part 1</strong> (<a href="https://www.tapplastics.com/product_info/videos/how_

How to Make a Simple Silicone Mold Part 2

<p><strong>How to Mix and Pour <a href="https://www.tapplastics.com/product/mold_making_materials/mold_making_supplies/tap_silicone_rtv_mold_making_system/61&qu

How to Build a Box with Plastic

<p><strong>How to Build a Basic Acrylic Box: A Step-by-Step Guide</strong></p> <p>Plastic is a fantastic material for creating a variety of project

How to Make a Two-Part Mold

<p><strong>How to Make a Simple Two-Part Mold Using Urethane RTV Rubber</strong></p> <p>Creating a two-part mold is essential for capturing the det

How to Build a Mold Box

<p><strong>How to Make Mold Boxes for Urethane and Silicone RTV Molds</strong></p> <p><a href="https://www.tapplastics.com/product/mold_mak

How to Make Jewels, Gems, Crystals, and Pendants

<p><strong>How to Make Your Own Jewelry, Gems, and Crystals with Casting Resin</strong></p> <p>Creating your own custom jewels, gems, crystals, and

How to make a Resin Table Top Part 1

<p><strong>How to Create a Custom Resin Tabletop with Embedded Designs</strong></p> <p>Nothing matches the beauty of a crystal-clear resin tabletop

How to Make a Resin Table Top Part 2

<a href="https://www.tapplastics.com/product_info/videos/how_to_make_a_resin_table_top_part_1">Click here</a> to see Part 1. <p>&nbsp;</p>

How to use Envirotex Lite and Ultra-Seal

<p><strong>Guide to Using Ultra-Glo and Ultra-Seal</strong></p> <h3>Introduction</h3> <p>This guide provides step-by-step instructio

How To Glue Acrylic

<p><strong>A Beginner's Guide to Gluing Acrylic: Tips and Techniques</strong></p> <p>Gluing acrylic is a unique process that differs significantly

How to Bend Plastic

<p><strong>A Complete Guide to Bending Plastic with a Strip Heater</strong></p> <p>Bending plastic is an essential technique for many DIY and profe

How to build a Plastic Heat Bender

<p><strong>How to Build and Use a DIY Plastic Line Bender</strong></p> <p>Bending plastic sheets at home is made easy with a DIY line bender. This

How to Polish and Repair Scratched Plastic

<p><strong>How to Polish and Maintain Plastic for a Sparkling Finish</strong></p> <p>Plastic is a beautiful and decorative material, known for its

How to Polish and Shape Plastic Edges

<p><strong>Acrylic Edge Finishing Techniques</strong></p> <p>Acrylic plastic can be incredibly beautiful, especially when its edges are properly pr

How to Repair Scratched CDs, DVDs, iPods and more

<p><strong>How to Restore Scratched Plastics with the Novus Polish System</strong></p> <p>Scratched plastic surfaces can be frustrating, but you do

How to Protect Your LCD or LED TV

<p><strong>Protect Your LCD and DLP TV Screens with a Custom Screen Protector</strong></p> <p>LCD TVs, DLP TVs, and LCD computer monitors have soft

Fiberglass Repair Guide

<p><strong>Fiberglass Repair Guide</strong></p> <p>This guide provides a step-by-step demonstration of a simple fiberglass repair. The methods outl

How to Repair Gelcoat Part 1

<p><strong>How to Perform a Simple Non-Structural Gel Coat Repair</strong></p> <p>Gel coat is a protective outer layer applied to fiberglass surfac

How to repair Gelcoat Part 2

<p><strong>How to Apply and Finish Gel Coat for Fiberglass Repair (</strong><a href="https://www.tapplastics.com/product_info/videos/how_to_repair_gelcoat

How to Waterproof with Coat-It

<p><strong>How to Create a Tough, Waterproof Coating with Coat-It</strong></p> <p>Creating a durable, waterproof coating requires the right materia

How to Apply Vinyl Graphics

<p><strong>How to Install Self-Adhesive Vinyl Graphics for a Professional Finish</strong></p> <p>Self-adhesive vinyl graphics are an affordable and

How to Select Window Film

<p><strong>A Comprehensive Guide to Choosing the Right Window Film</strong></p> <p>Window film can offer tremendous benefits to your home or busine

How To Install Window Film

<p><strong>How to Install Window Film Like a Pro</strong></p> <p>Installing window film in your home or business is an excellent way to achieve pro

Black LED Acrylic In Action

Now available at TAP Plastics: Black LED Acrylic Sheet.

Cosplay DIY Supplies

<p><strong>The Ultimate Cosplay Materials Guide from TAP Plastics</strong></p> <p>Bringing your cosplay dreams to life requires the right materials

TAP InstaShape Video Demo

<h1><strong>How to Use TAP Insta Shape: A Versatile Moldable Plastic for DIY &amp; Cosplay</strong></h1> <p>TAP Insta Shape is a moldable therm

Plastic Containers at TAP Plastics

<h1>Find the Perfect Container for Every Need at TAP Plastics</h1> <p>TAP Plastics offers a wide variety of <strong>containers</strong> designed fo

Display Items at TAP

<h1><strong>Custom &amp; Ready-Made Display Cases, Stands, and Boxes – TAP Plastics</strong></h1> <p>Looking for the perfect way to showcase

Fiberglass Roller

<p><strong>A Guide to Fiberglassing with Rollers</strong></p> <p>Fiberglassing with rollers is an efficient way to create strong, lightweight, and

Guide to Rod Stock and Shapes at TAP Plastics

<p><strong>Guide to Rod Stock and Shapes at TAP Plastics</strong></p> <p><a href="https://www.tapplastics.com/product/plastics/plastic_rods

Tubing Options at TAP Plastics

<p><strong>A Guide to Tubing Options at TAP Plastics</strong></p> <p>TAP Plastics carries a wide variety of tubing options for different applicatio

Plastic Materials on Rolls at TAP Plastics

<h1>A Guide to Plastic Materials on Rolls at TAP Plastics</h1> <p>TAP Plastics offers a wide variety of plastic materials on rolls, available by the foot, yard

Trade Show Essentials at TAP Plastics

<h1>Enhance Your Trade Show Display with TAP Plastics</h1> <p>A successful trade show display captures attention, showcases your brand, and leaves a lasting im

How to Work with Worbla

<h1><strong>Worbla: The Ultimate Thermoplastic for Cosplay, Crafting, and Model Making</strong></h1> <p>Worbla is a <strong>non-toxic thermop

Picture Frames and Display Holders

<h1><strong>Picture Frames &amp; Display Holders at TAP Plastics</strong></h1> <p>TAP Plastics offers a wide variety of <strong>picture f

Adhesive Glues and Tapes

<p><strong>Your Guide to Choosing the Right Adhesive and Tape at TAP Plastics</strong></p> <p>When it comes to bonding different materials, choosin

Literature Holders at TAP Plastics

<p><strong>A Guide to Literature Holders from TAP Plastics</strong></p> <p>When it comes to organizing and displaying literature in a professional

Three Dimensional Signage with the Quick Snap System

<p><strong>How to Create Professional 3D Signs with the Quick Snap Letter System</strong></p> <p>Three-dimensional signs add depth and visual impac

The Basics of Fiberglass Fabric

<p><strong>A Comprehensive Guide to Fiberglass Fabric: Choosing the Right Reinforcement</strong></p> <h3>Introduction</h3> <p>Fiberg

Picture Framing Options at TAP Plastics

<p><strong>A Guide to Picture Framing Options at TAP Plastics</strong></p> <p>Framing pictures, posters, or menus doesn’t have to be limited to t

Introduction to Mold Making

<p><strong>A Guide to Choosing the Right Flexible Mold Material from TAP Plastics</strong></p> <p>When creating molds for casting, selecting the ri

Introduction to TAP Platinum Silicone

<p><strong>The Ultimate Guide to Mold Making with TAP Platinum Silicone</strong></p> <p>Mold making has never been easier with <a href="htt

Cast Objects in Clear Resin

<p><strong>How to Cast Embedments in Clear Polyester Resin</strong></p> <p>Casting objects in clear polyester resin allows you to create stunning d