Chemcast Bullet Resistant Acrylic

Enter Specifications
Color
Unit
Thickness
inches
Width
inches
Length
inches
Quantity
sheets
Choose Options
Flat edge for gluing
$1 per lineal foot
Minimum length 6" Minimum length 155 mm
$1.25 per lineal
$4.10 per lineal
NOT AVAILABLE FOR THIS ITEM
$5 / pc | 4 corners
inches
$2 per hole
holes
per sheet
Available hole sizes:
1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16, 5/8”, 11/16”, 3/4", 13/16”, 7/8”, 15/16”, and 1”.
After placing your order you will receive an email with instructions for sending us hole sizes and their locations.

Chemcast BR 1.250 sheets are 1.25" thick, transparent cell cast acrylic sheet which meets the UL752 Level 1 requirements. 


The cell cast manufacturing technique produces sheets with unsurpassed optical clarity while maintaining a light transmission of 92%. Every sheet is inspected to ensure that the material meets exacting visual specifications. Thickness tolerances are checked on a sheet-by-sheet basis to ensure that the material will provide the required protection. The material is protected with masking to prevent surface scratches during shipping and manufacturing.

Bullet Resistance
Underwriters Laboratories, UL 752, is the specification most commonly used to identify a material's level of bullet resistance. Chemcast sheets listed under UL 752 are rated for both indoor and outdoor applications.

Fabrication
Most fabrication techniques used for standard acrylic sheet will work with BR as the only difference between the two materials is the thickness of the sheet. It is essential to keep frictional heat to a minimum during fabrication to reduce internal stress. It is also necessary to prevent or remove any "notching" along the cut edge of the sheet. The presence of notches could reduce the material's resistance to cracking. Either scraping or bull nosing the edges before installation can eliminate notches. Cutting of the material can easily be accomplished with the use of a sturdy table saw. A saw blade having carbide tips and a "triple chip" tooth design achieves the best results. More intricate cuts can be made using a band saw or hand-held reciprocating saw.

Full sheet, please email info@tapplastics.com for prices.
 

TAP Video: Bullet resistant acrylic


For Working with Acrylite Acrylic Sheet data sheet, click here. 
For Acrylite Acrylic Sheet chemical resistance, click here. 
For Acrylite Acrylic Sheet physical properties, click here. 

TAP Video: How to cut plastic sheet


TAP Video: How to polish and repair scratches


For fractions, decimals and millimeters conversion chart, click here.

didyou

Did you know that acrylic plastic is often called plexiglass?