GEHR Acetal

Enter Specifications
Choose Options
For gluing
Minimum length 6" Minimum length 155 mm
$1.25 per lineal
$4.10 per lineal
$6.50 / pc | 1-4 corners
$7.25 / pc | 1-4 corners
$2.50 per hole
per sheet

Please note any special instructions in the comments during checkout.

Available hole sizes:
1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16, 5/8”, 11/16”, 3/4", 13/16”, 7/8”, 15/16”, and 1”.
After placing your order you will receive an email with instructions for sending us hole sizes and their locations.

Cut to size orders are cut with table and CNC panel saws and have a cut tolerance of +/- .060”. Plastic sheets have a thickness tolerance of +/- 10% and can have thickness variations throughout the sheet. Cut to size items cannot be returned for a refund or exchange.

Sheet sizes, colors, thicknesses and products available on our website are just a fraction of what's available at TAP Plastics stores.

Cut to size orders are currently taking 1 to 2 days (M-F) to process.

Visit your local TAP Plastics store where cut-to-size orders often take less than five minutes, start to finish.

Acetal Copolymer (POM-C)

The continuous operating temperature of polyoxymethylene ranges between -40 °F and +212 °F. The high surface strength is only surpassed by a few materials. Acetal exhibits good sliding properties and high resistance to wear and tear because of its high strength and smooth surface. There is a very low risk of stress cracks. Acetal (Copolymer) exhibits a high thermal stability and a high resistance to chemicals.

Properties GEHR ACETAL™

  • Pressure tested quality
  • High strength and stiffness
  • High rigidity (to -40 °F)
  • High thermal stability
  • Low water absorption
  • High dimension stability
  • Good electrical insulating properties
  • Very good sliding properties
  • High resistance to solvents
  • Very high resistance to stress cracks
Applications GEHR POM-C™
  • Bearings
  • Fittings
  • Gear wheels
  • Parts for pumps
  • Screws
  • Bobbins
  • Parts for the textile industry
  • Carrier for coating lines
  • Food industry

Acetal is a mechanical plastic machined to size and shape and has a thickness tolerance of +/- .0250”/0 (never undersized). Acetal is industrial grade and may come with slight imperfections. They do not contain a paper or film masking.

Click here for Acetal Sheet datasheet.

TAP Video: How to cut plastic sheet

For fractions, decimals and millimeters conversion chart, click here.