GEHR Acetal Sheet

GEHR Acetal Sheet
Acetal Copolymer (POM-C)

For full sheet: Click Here

Sheet sizes, colors, thicknesses and products available on our website are just a fraction of what's available at TAP Plastics store locations.
 

Web orders can take one to two business days to process.

Visit your local TAP Plastics store where cut-to-size orders often take less than five minutes, start to finish.

The continuous operating temperature of polyoxymethylene ranges between -40 °F and +212 °F. The high surface strength is only surpassed by a few materials. Acetal exhibits good sliding properties and high resistance to wear and tear because of its high strength and smooth surface. There is a very low risk of stress cracks. Acetal (Copolymer) exhibits a high thermal stability and a high resistance to chemicals.

Properties GEHR ACETAL™
  • Pressure tested quality
  • High strength and stiffness
  • High rigidity (to -40 °F)
  • High thermal stability
  • Low water absorption
  • High dimension stability
  • Good electrical insulating properties
  • Very good sliding properties
  • High resistance to solvents
  • Very high resistance to stress cracks
Applications GEHR POM-C™
  • Bearings
  • Fittings
  • Gear wheels
  • Parts for pumps
  • Screws
  • Bobbins
  • Parts for the textile industry
  • Carrier for coating lines
  • Food industry
The following plastics are industrial grade and may come with slight imperfections. They do not contain a paper or film masking.

Click here for Acetal Sheet datasheet.


For fractions, decimals and millimeters conversion chart, click here.
Enter Specifications
Color
Unit
Thickness
inches
Width
and
inches
Length
and
inches
Quantity
sheets
Choose Options
Routed Edges Flat edge for gluing
$1 per lineal foot
Rounded Edges Minimum length 6" Minimum length 155 mm
NOT AVAILABLE FOR THIS ITEM
$1.25 per lineal foot
$4.10 per lineal meter
Radius Corners Radius inches
$5 / pc | 4 corners
Holes Quantity holes per sheet
$2 per hole
Available hole sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16, 5/8”, 11/16”, 3/4", 13/16”, 7/8”, 15/16”, and 1”. After placing your order you will receive an email with instructions for sending us hole sizes and their locations. Available hole sizes: 3.18mm, 3.97mm, 4.76mm, 6.35mm, 7.94mm, 9.53mm, 11.11mm, 12.7mm, 14.29mm, 15.88mm, 17.46mm, 19.05mm, and 20.64mm. After placing your order you will receive an email with instructions for sending us hole sizes and their locations.