TAP X-30 is a rigid, 2 lb. density polyurethane foam that expands up to 30 times its original liquid volume, adding strength and buoyancy to your watercraft! Just mix equal amounts of Side A (Resin), and Side B (Catalyst), stir vigorously, and pour into an enclosed area—leaving plenty of room for expansion. X-30 is unaffected by gasoline, oil, solvents or other petroleum products, and is ideal for pour-in-place buoyancy or insulation.
*Mixing Quantities larger than 1/2 gallon requires a power mixer and experience with foam properties.
- Flotation Factor: approximately 60 lbs. per cubic ft.
- Excellent for tooling and mold-making
- Superior sound and thermal insulation
- Easy to fiberglass over—unaffected by polyester or epoxy resins
**Available by phone order only: (888) 827-7330, Mon-Fri 9am - 5pm (PST).
Note: When working with X-30 always cover your working surface with plastic film, as X-30 will soak through newspaper or cardboard and will be difficult to remove.
for X-30 Urethane Foam Warning.
TAP Video: TAP X-30 Foam in action!
for TAP X-30 Polyurethane Foam Product Bulletin.
for TAP X-30 Polyurethane Foam A Front Label.
for TAP X-30 Polyurethane Foam A Back Label.
for TAP X-30 Polyurethane Foam B Front Label.
for TAP X-30 Polyurethane Foam B Back Label.