Did you know that acrylic plastic is often called plexiglass?

Acrylic Clear - Bullet Resistant

Acrylic Clear - Bullet Resistant
Sheet sizes, colors, thicknesses and products available on our website are just a fraction of what's available at TAP Plastics stores. 

Web orders can take one to two business days to process.

Visit your local TAP Plastics store where cut-to-size orders often take less than five minutes, start to finish.

Chemcast BR 1.250 sheets are 1.25" thick, transparent cell cast acrylic sheet which meets the UL752 Level 1 requirements.

The cell cast manufacturing technique produces sheets with unsurpassed optical clarity while maintaining a light transmission of 92%. Every sheet is inspected to ensure that the material meets exacting visual specifications. Thickness tolerances are checked on a sheet-by-sheet basis to ensure that the material will provide the required protection. The material is protected with masking to prevent surface scratches during shipping and manufacturing.

Bullet Resistance
Underwriters Laboratories, UL 752, is the specification most commonly used to identify a material's level of bullet resistance. Chemcast sheets listed under UL 752 are rated for both indoor and outdoor applications.

Most fabrication techniques used for standard acrylic sheet will work with BR as the only difference between the two materials is the thickness of the sheet. It is essential to keep frictional heat to a minimum during fabrication to reduce internal stress. It is also necessary to prevent or remove any "notching" along the cut edge of the sheet. The presence of notches could reduce the material's resistance to cracking. Either scraping or bull nosing the edges before installation can eliminate notches. Cutting of the material can easily be accomplished with the use of a sturdy table saw. A saw blade having carbide tips and a "triple chip" tooth design achieves the best results. More intricate cuts can be made using a band saw or hand-held reciprocating saw.

Full sheet, please email info@tapplastics.com for prices.

For Working with Acrylite Acrylic Sheet data sheet, click here. 
For Acrylite Acrylic Sheet chemical resistance, click here. 
For Acrylite Acrylic Sheet physical properties, click here. 

For fractions, decimals and millimeters conversion chart, click here.
Enter Specifications
Choose Options
Routed Edges Flat edge for gluing
$1 per lineal foot
Rounded Edges Minimum length 6" Minimum length 155 mm
$1.25 per lineal foot
$4.10 per lineal meter
Holes Quantity holes per sheet
$2 per hole
Available hole sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16, 5/8”, 11/16”, 3/4", 13/16”, 7/8”, 15/16”, and 1”. After placing your order you will receive an email with instructions for sending us hole sizes and their locations. Available hole sizes: 3.18mm, 3.97mm, 4.76mm, 6.35mm, 7.94mm, 9.53mm, 11.11mm, 12.7mm, 14.29mm, 15.88mm, 17.46mm, 19.05mm, and 20.64mm. After placing your order you will receive an email with instructions for sending us hole sizes and their locations.